Rayleigh-Type Wave in A Rotated Piezoelectric Crystal Imperfectly Bonded on a Dielectric Substrate

Propagation characteristics of Rayleigh-type wave in a piezoelectric layered system are theoretically investigated. The piezoelectric layer is considered as a cubic crystal with finite thickness rotated about Y-axis and is imperfectly bonded onto a semi-infinite dielectric substrate. The imperfect interface between the two constituents is assumed to be mechanically compliant and dielectrically weakly conducting. The exact dispersion relations for electrically open or shorted boundary conditions are obtained. The numerical results show that the phase velocity of Rayleigh-type wave is symmetric with respect to the cut orientation of 45。 and can achieve the maximum propagation speed in this orientation. The mechanical imperfection plays an important role in the dispersion relations, further the normal imperfection can produce a significant reduction of phase velocity comparing with the tangential imperfection. Comparing with the mechanical imperfection the electrical imperfection makes a relatively small reduction of phase velocity of Rayleigh-type wave. The obtained results can provide some fundamentals for understanding of piezoelectric semiconductor and for design and application of piezoelectric surface acoustic wave devices.     

物联网中基于Multi-Agent的物间动态关系发现

物联网中存在大量异构关系的实体，其信息间的交互造成了物联网的内在矛盾。针对这一问题，提出将物联网中实体抽象化为对应的Agent，并以个体人为中心，利用本体的语义匹配及改进的物间动态关系计算方法，计算出针对个体人的物间动态关系；将原本异构的实体关系转化为Agent间基于动态关系紧密度排序的网络关系。经实验验证，该方法构建的关系网络可明显改善异构实体间交互的矛盾，而且相比原有类似方法，该方法解决问题的准确率和误差率均有改善，说明了该方法的准确性和可行性。     

淮河入江水道行洪能力分析

入江水道是淮河下游最大的泄洪河道,承担着淮河上中游70%以上的洪水泄入长江。根据1961—2018年大洪水期间的实测资料,利用水位流量法计算分析入江水道的泄洪能力和防洪能力。结果表明:因历史客观条件限制以及4个梯级控制河段整治的难度与复杂性,在不同时期各控制河段的行洪能力呈现各自不同的特点;经过多年持续有效治理,河道行洪能力整体得到提高;由近年来实测资料推算,各控制河段的行洪能力基本达到设计要求。对入江水道行洪能力的分析为淮河下游区的防汛抗洪和降低特大洪水威胁提供借鉴和参考,对区域经济社会又好又快发展具有现实意义。     

A skeletal n-butane mechanism with integrated simplification method

A new skeletal mechanism of n-butane is developed for describing its ignition and combustion characteristics applicable over a wide range of conditions: initial temperature 690–1430 K, pressure 1–30 atm, and equivalence ratio 0.5–2.0. Starting with a detailed chemical reaction kinetic model of 230 species and 1328 reactions (Healy et al., Combust. Flame, 2010), the directed relation graph method is applied as the first step to derive a semi-detailed mechanism with 134 species. Then, the reaction path analysis in conjunction with temperature sensitivity analysis is used to remove the redundant species and reaction paths simultaneously under the condition of low-temperature and moderate-to-high temperatures, respectively. Finally, a skeletal n-butane mechanism consisting of 86 species and 373 reactions can be obtained. Mechanism validation indicates that the new developed skeletal mechanism is in good agreement with the detailed mechanism in predicting the global ignition and combustion characteristics. The new skeletal mechanism is further validated using extensive available literature data including rapid pressure machine ignition delay time, shock-tube ignition delay time, laminar flame speed, and jet-stirred reaction oxidation, covering a large range of temperatures, pressures, and equivalence ratios. The comparison results demonstrate that a satisfactory agreement between predictions and experimental measurements is achieved.     

沥青组成与乳化沥青稳定性的灰熵关联研究

为研究乳化沥青储存稳定性与沥青组成及性质之间的关系,选用四种基质沥青,对其基本性质、四组分组成、元素组成和平均结构单元参数进行了分析。并分析了四种基质沥青制备的乳化沥青的储存稳定性。采用灰熵关联分析研究了乳化沥青储存稳定性与沥青的化学组成及基本性能之间的关系。结果表明:四组分组成中,胶质和沥青质含量是影响乳化沥青储存稳定性的最主要因素,胶质和沥青质含量越高,储存稳定性越好。元素组成中,杂原子含量是影响乳化沥青储存稳定性的最主要因素,杂原子含量越高,稳定性越好。然而,沥青的基本性质和平均结构单元参数与乳化沥青的储存稳定性之间没有明显的相关性。     

Deriving the priority weights from hesitant multiplicative preference relations in group decision making

In this paper, we investigate the deviation of the priority weights from hesitant multiplicative preference relations (HMPRs) in group decision-making environments. As basic elements of HMPRs, hesitant multiplicative elements (HMEs) usually have different numbers of possible values. To correctly compute or compare HMEs, there are two principles to normalize them, i.e., the α-normalization and the β-normalization. Based on the α-normalization, we develop a new goal programming model to derive the priority weights from HMPRs in group decision-making environments. Based on the β-normalization, a consistent HMPR and an acceptably consistent HMPR are defined, and their desired properties are studied. A convex combination method is then developed to obtain interval weights from an acceptably consistent HMPR. This approach is further extended to group decision-making situations in which the experts evaluate their preferences as several HMPRs. Finally, some numerical examples are provided to illustrate the validity and applicability of the proposed models.     

Phase evolution and microstructural studies in CaZrTi2O7 (zirconolite)–Sm2Ti2O7 (pyrochlore) system

From the characterization of a series compositions with general stoichiometry as Ca_1−xZr_1−xSm_2xTi₂O₇ (0.00 ≤ x ≤ 1.00), the phase evolution between zirconolite (CaZrTi₂O₇) and pyrochlore type Sm₂Ti₂O₇ has been elucidated. All the compositions were prepared by high temperature solid state reaction and characterized by powder X-ray diffraction (XRD) and electron probe for microanalyses (EPMA). Three major phase fields, namely two layer (2-M) or four layer (4-M) monoclinic zirconolite and cubic pyrochlore structure types were observed in this system. In addition, a feeble amount of perovskite type phase is found to coexist with zirconolite phase. 4-M zirconolite phase is observed as single phase field at the composition with x = 0.30 and 0.35, while cubic pyrochlore phase is observed as single phase at the compositions with x ≥ 0.60. Further, the composition and microstructure of coexisting phases are verified by back scattered electron image and EPMA studies.     

煤质分析中基准的确定和不同基的换算公式推导

针对煤化工初学者和质检人员容易混淆、难以理解的煤质分析中的基准及其确定、不同基准间的相互关系和换算公式等问题,介绍了煤质分析中基准的概念,阐述了煤的工业分析、煤的元素分析和其它常用指标分析中基准的表达和确定,分析了不同基准间的相互关系和物质含义,并根据物质不灭定律对不同基的换算公式进行了推导。     

重庆红粘土本构模型验证

以重庆红粘土为研究对象，通过对重庆红粘土在不同应力路径加荷条件下的应力－应变关系的分析研究，运用“土的本构关系图象程序”对重庆红粘土本构关系，进行了四种本要模型验证，认为非线性弹性成都科技大学Ｋ－Ｇ模型和殷宗泽双曲服面弹塑性模型能反映重庆红粘土应力－应变关系的本构模型，提出了相应的模型参数。